Mezzanine platform

Release time:

2023-03-24

The overall structure of the mezzanine shelf is assembled, no need for on-site welding, and the overall structure is beautiful and generous. Compared with concrete structures or steel structures, since the shelves on the ground floor themselves serve as supports for the floors above, they have the advantages of low cost and high space utilization.

The steel platform is also called the steel structure platform, working platform, and steel platform shelf. It looks simple in structure, but with the increasing land prices and rents, it has solved the problem of storing as much goods as possible in a limited space for many companies and improved space utilization. Like other storage shelves, the steel platform is also a fully assembled structure, consisting of columns, main beams, secondary beams, floor panels, stairs and guardrails. The steel platform is assembled as a whole, usually designed with 2-3 layers, without on-site welding, and has a load-bearing capacity of 300Kg-1500Kg/square meter.
There are many types of storage shelves, and different types of shelves are suitable for different industries. Among the many types of storage shelves, the structure of the steel platform shelf is very different from that of other shelves. Similar to it is the loft-type shelf, which is also relatively special in structure.
The use range of steel structure platform is larger than other types of shelves. It is precisely because of this that we must pay attention to safety during use. We need to abide by the eight principles of using steel structure platform:
1) Load limit signs should be set during the use of steel structure platform, especially steel platform shelves with hydraulic lifting platforms, which need to be marked with load limits in prominent positions;
2) The placement point and upper tie point of the steel structure platform are located on the building, so they cannot be set on construction facilities such as scaffolding, and the support system must not be connected to the scaffolding;
3) The concrete beams and slabs at the steel placement point of the steel platform should be embedded and connected to the platform bolts;
4) Steel structure The horizontal angle between the steel wire rope used by the platform and the platform should be 45 to 60 degrees;
5) The tensile strength of the beams and columns at the upper tie points of the steel structure platform should be verified to ensure the safety of the building and the platform;
6) When installing the steel structure platform, the steel wire rope should be held firmly with a special hook. When other methods are used, there should be no less than 3 buckles. The sharp corners of the building should be padded with soft materials, and the outer edge of the steel platform should be slightly higher than the inner side;
7) The steel structure platform should use a clamping ring, and the hook should not be directly hooked on the platform ring;
8) Guardrails need to be installed around the steel structure platform, and fences need to be installed when necessary to prevent people or goods from falling.

LATEST NEWS

Shelf shelves

The shelves adopt a buckle-type structure, which is easy to disassemble and assemble. The layer spacing can be adjusted up and down in units of 50mm according to the height of the goods. Its load-bearing range can reach 200-800kg/layer. Laminates can be made of steel plates, wooden boards, medium-density boards and other materials. This kind of shelf has a suitable height and is convenient for manual access to goods. It is an ideal storage product for small and medium-sized warehouses.

2022-09-16

Smart shelf technology helps business development

Smart shelves are a new concept emerging in logistics and warehousing. The use of three-dimensional warehouse equipment can realize the rationalization of high-rise warehouses, automation of access, and simplification of operations; smart shelves are currently the most advanced form of technology. The main body of the smart shelf consists of shelves, tunnel stacking cranes, entry (exit) workbench and automatic entry (exit) and operation control systems.

2023-03-06

Heavy duty shelves

Heavy-duty shelves, also commonly known as beam shelves or cargo shelves, belong to the pallet shelf category and are the most common shelf form among various domestic storage shelf systems. Heavy-duty shelves are the most commonly used type of shelves, with each layer carrying a load of more than 500Kg. This is where the name comes from.

2023-03-14

Cantilever shelves

Cantilever shelves use special profile columns and high-strength cantilevers, and are suitable for storing long materials, ring materials, plates, pipes and irregular materials. The forward-extending cantilever can be single-sided or double-sided. It has the characteristics of light structure and good load-bearing capacity. The load-bearing capacity of a single arm can reach 500kg. The specially reinforced column structure can withstand 2000~3000kg pressure

2023-04-18

Mezzanine platform

2023-03-24

Storage Pallets

The correct use of pallets should be to package and stack the goods on the pallet and add appropriate strapping and wrapping to facilitate mechanical loading and unloading and transportation, so as to meet the requirements of loading, unloading, transportation and storage.

2024-06-04

Email : tina@zhishoumetal.com
Tel：+8619353865362
WhatsApp：+8619353865362
Add :Building 26, Jingyuan, West District, Liaoda Garden, Economic and Technological Development Zone, Liaocheng City, Shandong Province

WeChat

GET A FREE QUOTE